Laserfiche WebLink
Building Code Compliance <br /> <br />Provide a 1:20 ramp from the parking lot area to the main sidewalk going <br />to the main door. This ramp shall be a 1:20 slope. In addition, it shall be <br />a shp resistant material. <br /> <br />· Provide handicap parking signs. These parking signs shall be per the <br /> State Handicap Code. <br /> <br />Provide male and female handicap bathrooms per the State Handicap <br />Code. These bathrooms should be installed prior to occupancy, however, <br />should be addressed once there is a known occupant for this building so <br />the bathrooms can be placed in a convenient location that will coincide <br />with the design for that use. <br /> <br />· Provide a 1:12 ramp going to the office area. <br /> <br />Provide a second exit from the building. This exit shall be a distance of ½ <br />the diagonal of the building, minimum. Again, this exit can wait until the <br />occupant is determined since this second exit is based out of total <br />occupant load. <br /> <br />· Repair and/or replace emergency exit signs and emergency lighting. <br /> <br />· Provide a second exit from the lower level to the exterior of the building. <br /> <br />Building Code Design <br /> <br />· An elevator and/or ramp is required if the basement will be used for <br /> something other than storage. <br /> <br />When a tenant moves into this building, because of the square footage, an <br />architectural design shall be required for such occupancies such as offices, <br />restaurants, etc. <br /> <br />A mechanical design with a mechanical engineer sign-off shall be <br />required, if the occupant group changes from what it originally was <br />designed for. <br /> <br />The aforementioned items are areas of the code that will need to be <br />addressed. However, many of these items should be addressed when plans <br />are being developed for the change in the occupancy group so that the <br />corrections do not interfere with the design. <br /> <br />s:\b&z\cliffXcs 10-13.doc <br /> <br /> <br />